-
Double Skin isolation
-
Cooling system: Airconditioner as the main cooling system and fan as the back up during AC failure
-
Compartment for accommodating indoor BTS , DC power supply , Battery back up
-
Output power :8000 W
-
Flatpack2,2000W rectifier
-
Protection: IP55
-
monitoring of other equipment on site
-
4x48V,160AH manageable Battery strings
-
Space for Microwave IDU
-
Gen Set Plug and Gen Set Switch
-
Dimension: 2321x1693x790mm(hxwxd)
BSS HOUSE
Pars Eltek outdoor power system BSS House with Extention Cabinet is a compact solution for BTS
station including compartments for indoor BTS, AC PDB ,DC PDB, Batteries for back up, 19” space
for Microwave and top head with gland suitable for RF cable to the Antenna. This system is expandable for more BTS compartment and more Batteries.
The cabinet size is (H xW xD) :2321x1693x790mm
Features
AC PDB : It is a 3U shelf,Contains AC MCBs(12x 10A MCB for Load,
4x 25A-2pMCB for Airconditioning,4x 6A MCB for AC outlet).
DC PDB: It is 3U shelf,Contains all DC MCBs(4x 6A MCB for Fan,
4x10A MCB for DC Load)
Main MCB : 63A-3p MCB,for controlling the main AC Input
Batteries: Up to 4 manageable string of Batteries, up to 16 x 160Ah Batteries
Ventilation: All batteries exhausted Gas are ventilated to the outside environment
AC input : Large variations on the input voltage (85-290 V AC)
Temperature Control :Three version of tempreture control is available.
- Air Conditioning : Air conditioning is equipped with heat pressure control, for low ambient operation compressor Heater(optional), Coated condenser coil, malfunction switch and thermostat. Separate Aircon for power and microwave cabinet and BTS cabinet.
- Fan : DC Fan cooled with tunable temperature control
- Fan and Aircon : DC fan is used as back up for Aircon in case of power cut off




